Amerika Nasco Sludge Judge ® C09247 ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl

Sludge Judge ® - 15 ft. (4.60 m)

Product Number: C09247

A lëu bï yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k, ka yɔ̈ɔ̈k Brand: US NASCO Recommended Industry: Coal Mine, Geological Exploration, Wastewater Treatment Plant, Chemical Plant Food Plant etc.

NASCO sludge sampling bar looi bɛ̈n looi bɛ̈n looi bɛ̈n looi bɛ̈n looi bɛ̈n looi bɛ̈n looi bɛ̈n looi bɛ̈n looi bɛ̈n looi bɛ̈n looi A lëu bï ya luui në ɣän kɔ̈k yiic, cïmën de ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye ɣän ye A cɔl corrosion resistance. A lëu ba 3 ounces (89ml/0.31m) tɔ̈ɔ̈u në paam tök yic.

A man tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n

US nasco sludge sampling rod coal sludge probe use method:

1, ka tɛ̈ɛ̈m ye tɛ̈ɛ̈m ye tɛ̈ɛ̈m ye tɛ̈ɛ̈m ye tɛ̈ɛ̈m ye tɛ̈ɛ̈m

A、 Valve ye looi, a looi bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i. Na cï kä ye kek tɔ̈ɔ̈u ye kek tɔ̈ɔ̈u ye kek tɔ̈ɔ̈u ye kek tɔ̈ɔ̈u ye kek tɔ̈ɔ̈u ye kek tɔ̈ɔ̈u ye kek tɔ̈ɔ̈u ye kek tɔ̈ɔ̈u ye

B、 Lɔ̈ɔ̈m kɛ̈ɛ̈k, ku lɔ̈ɔ̈m kɛ̈ɛ̈k kɛ̈ɛ̈k kɛ̈ɛ̈k.

2. N'a tɛ̈n ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ Lɔ̈k kä tɔ̈u yɔɔ̈ɔ̈r tɔ̈u yɔɔ̈ɔ̈r tɔ̈u yɔɔ̈ɔ̈r tɔ̈u yɔɔ̈ɔ̈r tɔ̈u yɔɔ̈ɔ̈r tɔ̈u y

Modɛl:

C09247WA: Set, 15-ft. (4.60m)

C09249WA: Sample bar bag;

Bɛ̈ɛ̈r feere:

C09250WA: ye tɔ̈u piny, 5-ft. (1.53m);

C09251WA: tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r, 5-ft. (1.53m);

C09252WA: Kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye.

Do NOT use for sampling ethanol or ethanol blended fuel. Use Nasco fuel sampler (B01477).

The Sludge Judge ® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic materials are needed. The unit holds approximately 3 oz. per foot (89 ml per 0.31 m). The Sludge Judge ® comes in 5 ft. (1.53 m) sections of 3/4 in. (1.90 cm) plastic pipe with screw-type connectors. The top section includes a nylon rope for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165 ° F (74° C). Sludge Judge ® is not autoclavable. A convenient cotton canvas carrying case that holds four sections, a cleaning brush, cleaning rod, and cotton strips are available.

To use:

1. Slowly lower the Sludge Judge ® to the bottom of the tank. The float valve opens (see figure A), allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised. This sets the check valve(see figure B), trapping the mixture inside.

2. When the unit has been raised clear of the liquid, the amount of solids in the sample can be read using the 1 ft. (0.31 m) increments marked on the pipe sections. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample. One-year warranty.